China HS → US HTS
China HS 7228.3091 (截面为圆形的): US HTS candidates & duty rates
China tariff line for "截面为圆形的" shares the international HS6 anchor 722830 with 11 US HTS candidates below. Compare descriptions, then calculate landed duty.
Updated
China HS 7228.3091 most commonly maps to US HTS 7228.30.80. Total duty rate from China (MFN + Chapter 99 overlays): about 25%. Verify the description before filing.
China tariff line facts
| China HS line | 7228.3091 |
|---|---|
| Description | 截面为圆形的 |
| Category path | 其他合金钢条、杆；其他合金钢 > 其他条、杆，除热轧、热拉拔或 热挤压外未经进一步加工 > 其他 > 截面为圆形的 |
| Shared HS6 | 722830 |
| China MFN rate (reference) | 3 |
| Schedule version | 2026 |
US HTS candidates (11)
| US HTS | Description | General (MFN) | Total from China |
|---|---|---|---|
| 7228.30.80 | Other | Free | 25% |
| 7228.30.20.00 | Of ball-bearing steel | Free | 7.50% |
| 7228.30.40.00 | Of chipper knife steel, not cold-formed | Free | 25% |
| 7228.30.80.05 | Of high-nickel alloy steel | Free | 25% |
| 7228.30.80.10 | Concrete reinforcing bars and rods | Free | 25% |
| 7228.30.80.15 | With a diameter or cross section measuring less than 76 mm | Free | 25% |
| 7228.30.80.41 | With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm | Free | 25% |
| 7228.30.80.45 | With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm | Free | 25% |
| 7228.30.80.70 | With a diameter or cross section exceeding 228 mm | Free | 25% |
| 7228.30.60.00 | Other | Free | 25% |
| 7228.30 | Of tool steel (other than high-speed steel): | — | — |
Total = MFN base + Section 301 / IEEPA / reciprocal overlays active for China origin. AD/CVD not included.
Frequently asked questions
Which US HTS code corresponds to China HS 7228.3091?
There is no one-to-one mapping: only the first six digits (HS6 722830) are shared internationally. Under this anchor the US schedule has 11 candidate lines; the most common is 7228.30.80. Match your product facts (material, use, construction) against the descriptions to pick the right one.
How much is US import duty for "截面为圆形的" from China?
Using the leading candidate 7228.30.80, the total rate from China is about 25% — MFN base plus the Chapter 99 overlays (Section 301 / IEEPA / reciprocal) active for China origin. Other candidates may differ, so verify classification first.
Why is China HS8 not identical to US HTS8?
The WCO Harmonized System is only agreed to six digits. China extends HS6 to 8/10-digit national lines for its own tariffs and statistics, and the US does the same with HTS8/HTS10 — the extensions are independent, so codes must be bridged via HS6.
How do I confirm the final HTS classification?
Compare the US line descriptions against your product facts, check CBP rulings for similar goods, and when in doubt request a binding ruling. The bridge tool lets you re-run this query and compare all candidates side by side.