China HS → US HTS
China HS 7219.3310 (按重量计含锰量在5.5％及以上 的铬锰系不锈钢): US HTS candidates & duty rates
China tariff line for "按重量计含锰量在5.5％及以上 的铬锰系不锈钢" shares the international HS6 anchor 721933 with 12 US HTS candidates below. Compare descriptions, then calculate landed duty.
Updated
China HS 7219.3310 most commonly maps to US HTS 7219.33.00. Total duty rate from China (MFN + Chapter 99 overlays): about 25%. Verify the description before filing.
China tariff line facts
| China HS line | 7219.3310 |
|---|---|
| Description | 按重量计含锰量在5.5％及以上 的铬锰系不锈钢 |
| Category path | 不锈钢平板轧材，宽度在600毫米 及以上 > 除冷轧外未经进一步加工 > 厚度超过1毫米，但小于3毫米 > 按重量计含锰量在5.5％及以上 的铬锰系不锈钢 |
| Shared HS6 | 721933 |
| China MFN rate (reference) | 6 |
| Schedule version | 2026 |
US HTS candidates (12)
| US HTS | Description | General (MFN) | Total from China |
|---|---|---|---|
| 7219.33.00 | Of a thickness exceeding 1 mm but less than 3 mm | Free | 25% |
| 7219.33.00.05 | Of high-nickel alloy steel | Free | 25% |
| 7219.33.00.20 | Containing more than 0.5 percent by weight of nickel | Free | 25% |
| 7219.33.00.35 | Of high-nickel alloy steel | Free | 25% |
| 7219.33.00.36 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | Free | 25% |
| 7219.33.00.42 | Containing less than 15 percent by weight of chromium | Free | 25% |
| 7219.33.00.45 | Of a width of 1370 mm or more | Free | 25% |
| 7219.33.00.70 | Containing more than 0.5 percent but less than 24 percent by weight of nickel | Free | 25% |
| 7219.33.00.25 | Other | Free | 25% |
| 7219.33.00.38 | Other | Free | 25% |
| 7219.33.00.44 | Other | Free | 25% |
| 7219.33.00.80 | Other | Free | 25% |
Total = MFN base + Section 301 / IEEPA / reciprocal overlays active for China origin. AD/CVD not included.
Frequently asked questions
Which US HTS code corresponds to China HS 7219.3310?
There is no one-to-one mapping: only the first six digits (HS6 721933) are shared internationally. Under this anchor the US schedule has 12 candidate lines; the most common is 7219.33.00. Match your product facts (material, use, construction) against the descriptions to pick the right one.
How much is US import duty for "按重量计含锰量在5.5％及以上 的铬锰系不锈钢" from China?
Using the leading candidate 7219.33.00, the total rate from China is about 25% — MFN base plus the Chapter 99 overlays (Section 301 / IEEPA / reciprocal) active for China origin. Other candidates may differ, so verify classification first.
Why is China HS8 not identical to US HTS8?
The WCO Harmonized System is only agreed to six digits. China extends HS6 to 8/10-digit national lines for its own tariffs and statistics, and the US does the same with HTS8/HTS10 — the extensions are independent, so codes must be bridged via HS6.
How do I confirm the final HTS classification?
Compare the US line descriptions against your product facts, check CBP rulings for similar goods, and when in doubt request a binding ruling. The bridge tool lets you re-run this query and compare all candidates side by side.